Lenny - technophile

Lenny - technophile

Subscribe

Ignition 8/8.1 + 32bit Linux (Raspberry Pi)

To start off, I do not take credit for this. For reference, I got the information below (minus tweaks) from here [https://forum.inductiveautomation.com/t/ignition-8-client-on-raspberry-pi/24464/21] . Open a terminal session, and type the following commands: sudo su wget -q -O - https://download.bell-sw.com/pki/GPG-KEY-bellsoft

RHEL 8 + Windows 10 + WSL2 + neofetch

RHEL 8 + Windows 10 + WSL2 + neofetch

> These instructions assume you already have RHEL running under WSL2 on Windows 10. If not, you can follow my post here [https://www.lennysh.com/rhel-w10-with-wsl2/] (though, these instructions should work on RHEL anywhere). > Full credit to this goes to my friend Mike! You can see his post here [https:

RHEL + Windows 10 with WSL2

RHEL + Windows 10 with WSL2

> This article is going to assume you already have WSL installed, and have restarted the machine to finish that install. If you need to install WSL, please go here [https://docs.microsoft.com/en-us/windows/wsl/install-win10] first. You also need to ensure you have updated WSL to WSL2, the

Create a Tor VLAN using a Raspberry Pi and pfSense

First of all, majority of the credit goes to Magnus Hedemark [https://opusmagnus.wordpress.com/] for his article CREATE A TOR-ONLY VLAN WITH A RASPBERRY PI [https://opusmagnus.wordpress.com/2014/10/04/create-a-tor-only-vlan-with-a-raspberry-pi/] . I've copied parts of his article to mine since I did not do all of the